Siemens 6AG1222-1HH32-2XB0 DQ 16x relay/2 A Blocke

Siemens 6AG1222-1HH32-2XB0 DQ 16x relay/2 A Blocke

Contact：cassiebirthdayparty@gmail.com

The SITOP PSE200U selectivity module with 4 outputs (versions with adjustable output current range for each output from 0.5 - 3 A and 3 - 10 A) is available for this purpose; this monitors the 24 V branches for overload and short circuit (Figure 9-5 Electronic protection of 24 V loads using the SITOP PSE200U selectivity module (Page 62)). Brief current peaks, e.g. as a result of a high inrush current, are permitted, and branches with a longer overload

are switched into a no-current condition. This is also ensured for cables in a high-ohmic condition and for short circuits that slowly develop over time.

When an output fails, the fault is signaled using a group signal contact or as a single channel signal, and the branch of the module involved is displayed using an LED. For variants with single-channel signaling, function blocks for evaluation purposes are available for SIMATIC S7-1200/1500/300/400, for STEP 7 Classic and TIA Portal at no charge.

6AG1222-1HH32-2XB0 Technical drawing:

We would be appreciate to receive your inquiry and also here are some other products for your choice: