Siemens 6EP1333-2BA00 SIPLUS PS PSU200M SITOP Modular

Siemens 6EP1333-2BA00 SIPLUS PS PSU200M SITOP Modular

Contact：cassiebirthdayparty@gmail.com

SITOP modular is a primary-clocked power supply for connection to a 1-phase/2-phase AC line supply. An electronically regulated DC voltage that can be set via a potentiometer is available at the output of the device. The output of the device is isolated, no-load proof and short-circuit proof. The LED displays indicate the operating state. The integrated signaling contact (for 6EP1336-3BA00 and 6EP1337-3BA00, only when using the supplementary

6EP1961-3BA10 signaling module) can be used to further process the operating state of the device.

If the output current rises above the rated value and above the current limit, the device reduces the output voltage (see, e.g. Figure 6-14 6EP1333-3BA10 latching shutdown output characteristic (Page 44)). If the output voltage

falls below 20 V, the device shuts down latching, the red LED lights up. This limit voltage of 20 V is independent of the set output voltage.

The 'Short-time overload current' feature is not available in this operating mode. To also permit charging of large capacitances in this operating mode at the output, a shutdown is performed during the first 10 s after power on or remote switch on in conjunction with the non-latching signaling module. During these first 10 s, the device responds for overload as if the switch is OFF.

6EP1333-2BA00 Technical drawing:

We would be appreciate to receive your inquiry and also here are some other products for your choice: